Back

    What is in-season inventory rebalancing?

    A definition, the decision rule with a worked three-store example, the data it needs, when not to transfer, and four published inter-store transfer cases.

    Author: RNV AdminCategory: Inter-Store Transfer OptimizationDate: November 13, 2026
    What is in-season inventory rebalancing?

    In-season inventory rebalancing is the practice of moving stock a retailer already owns between its stores during the selling season, mainly through inter-store transfers, so that each product sits where it is most likely to sell at full price. It is a profitability decision: a move is worth making only when the margin gained at the receiving store is larger than the margin given up at the sending store plus the cost of the transfer.

    What is in-season inventory rebalancing?

    Every season starts with a buy quantity and an initial allocation to stores. Within a few weeks, real sales diverge from that plan: one store sells out of a style or a size while another still holds most of what it received. The chain has enough stock in total, but not in the right places. In-season inventory rebalancing is the set of decisions that corrects this while the product can still be sold at full price.

    The same work is also called inter-store transfer, store-to-store transfer or stock redistribution.

    What is it not?

    • It is not pre-season buying. Rebalancing works with stock that is already bought and delivered.
    • It is not a warehouse operation. Picking, packing and routing are execution. Rebalancing is the decision before them: which product, from which store, to which store, how many units.
    • It is not end-of-season clearance. Clearance accepts a lower price. Rebalancing looks for a store that can still sell at the current price.
    • It is not recording a transfer. An ERP or retail management system such as Nebim V3 records and executes a transfer. Deciding which transfers are worth making is a separate job for a planner or a decision layer on top of that system.

    Which tools does a retailer have during the season?

    LeverWhere the stock comes fromWhen it fits
    Inter-store transferAnother store that holds more than it can sellThe warehouse has none left, or a store's surplus would otherwise be marked down
    ReplenishmentThe warehouse or distribution centerCentral stock exists and can reach the store before demand fades
    In-season allocationStock held back at the start of the season, or late deliveriesThe retailer kept a reserve to place after seeing real sales

    Markdown is the fourth lever, and it works on price, not location: a transfer keeps the price and changes the store, a markdown keeps the store and changes the price. The usual order is to rebalance first and mark down what no store can sell at the current price. See how markdown optimization works in fashion retail.

    When does a chain need to rebalance?

    • The same product is out of stock in some stores and overstocked in others.
    • Core sizes are missing where the product sells well, while full size runs sit where it does not.
    • Markdowns start in some stores while others still sell the product at full price.

    How do retailers rebalance inventory between stores during the season?

    Seven steps, repeated on a weekly calendar.

    1. Measure the position. For each product, size and store: sellable stock, stock in transit and the current sales rate.
    2. Forecast the rest of the season. Estimate what each store will sell before the planned markdown date.
    3. Find senders and receivers. A sender holds more than it will sell in the time left. A receiver has demand it cannot serve from stock on hand and in transit.
    4. Apply the decision rule. Keep only the moves with a positive net benefit.
    5. Protect size runs. Do not pull a core size out of a store that still sells the style. When a style is broken in several stores, consolidate the remaining sizes into fewer stores.
    6. Approve by exception. Low-cost moves follow a standing rule; costly ones go to a planner.
    7. Measure the result, not the activity. What matters is what the transferred units sold for, not how many moved.

    The decision rule

    Net benefit of a transfer = expected margin at the receiving store, minus expected margin given up at the sending store, minus total transfer cost.

    A transfer is worth making when the net benefit is positive and the stock arrives with enough season left to sell it. Transfer cost includes picking and packing, transport, receiving, and the days the stock is on no shelf.

    A worked example with three stores

    The figures below are illustrative, not customer data.

    One jacket, six weeks before the planned markdown. Full-price margin is 60 per unit. A unit still unsold at the markdown date is expected to earn 20. A transfer costs 3 per unit and takes one week.

    StoreStockWeekly salesWeeks of coverPosition
    A40220Sells 12 in six weeks. After a display minimum of 4, the surplus is 24
    B480.5Sells out this week. Could sell about 40 more once a transfer arrives
    C1234Sells everything it has at full price

    Move 24 units from A to B. Margin at the receiving store: 24 x 60 = 1,440. Margin given up at the sending store, where these units would have reached markdown: 24 x 20 = 480. Transfer cost: 24 x 3 = 72. Net benefit: 1,440 - 480 - 72 = 888. The move is worth making.

    Move units from C to B. Each unit gains 60 in B, gives up 60 in C and costs 3 to move. Net benefit: minus 3 per unit. The move destroys value, even though B sells faster than C.

    A difference in sales rate is not enough. What decides a transfer is what the unit would have earned if it had stayed where it was.

    When should a retailer not transfer?

    • Too little season left. Stock that arrives a week or two before markdown has no time to sell at full price.
    • The sender would sell it anyway. The move only shifts the sale and adds cost.
    • The move breaks the sender's size run or display. A store left with fragments sells less of what remains.
    • The same item keeps travelling. Stock that moves back and forth shows that the rules react to noise, not to demand.
    • The cost is close to the margin it protects. For low-margin or bulky products, a markdown in place is the better decision.

    What data does in-season rebalancing need?

    InputWhat it is used for
    Sellable stock on hand, by product, size and storeFinding surplus and shortage
    Stock in transit and on orderAvoiding a transfer to a store that is about to be replenished
    Sales rate and forecast, by product and storeEstimating what each store will sell in the time left
    Weeks of cover (WOS)Comparing stores on one scale: stock divided by weekly sales
    Minimum display quantityThe floor a sending store must keep
    Size curveProtecting core sizes and spotting broken runs
    Transfer cost and lead time, by store pairThe cost side of the decision rule
    Markdown calendarKnowing how many full-price weeks are left
    Warehouse stockChoosing between replenishment and transfer

    Each retailer sets its own thresholds for these inputs. The terms are defined in the in-season inventory rebalancing glossary.

    How is the result measured?

    • Full-price sell-through of the transferred units in the receiving stores.
    • Lost sales from stockouts, before and after.
    • Sales conversion rate in the receiving stores.
    • Share of stock that reaches markdown.
    • Transfer cost per unit, and units moved more than once.

    A result is only meaningful against a comparison: similar stores or products that were not rebalanced, over periods of the same length.

    What results have retailers published?

    RNV Analytics has published inter-store transfer case studies for four retailers that use Klibre.

    RetailerSectorWhat was doneResult published by RNV
    TerganLeather goodsStore-to-store transfersSales of transferred products up 15 points; sales conversion rate up 10 points in the first week
    YargıcıFashionInter-store transfer moduleUp to 300% more sales on transferred products
    Under ArmourSportswearTransfers that follow size curves and product segmentsTotal sales up 10 points
    SkechersFootwearTransfers and replenishment in one decision engine17 points of sales growth

    These are results published by RNV, not independent measurements. The four figures measure different things and should not be ranked against each other.

    How does Klibre handle in-season inventory rebalancing?

    Klibre is the AI retail planning platform built by RNV Analytics. Its in-season module covers initial allocation, inter-store transfer, replenishment, loss sales analysis and shelf life analysis. RNV states that transfer decisions take size curves and product segmentation into account, which keeps core sizes available and prevents unnecessary transfers.

    Klibre works as the decision layer, not the system of record. It is designed to work with a retailer's existing ERP, POS and inventory systems, including Nebim V3, Odoo, Microsoft Dynamics (including Navision), SAP, Logo and Hitit, and a ready connector is available for Nebim V3. RNV states that every recommendation shows the data behind it, that transfer and replenishment recommendations are approved in one click, and that the team keeps control of what is executed.

    FAQ

    Is in-season inventory rebalancing the same as an inter-store transfer?

    An inter-store transfer is one move of stock from one store to another. In-season inventory rebalancing is the wider practice that decides which transfers to make, alongside replenishment from the warehouse and allocation of reserve stock.

    Should we transfer slow-moving stock to another store or mark it down?

    Transfer it if another store can sell it at full price in the time left and the margin gained there exceeds the margin given up plus the transfer cost. Mark it down if no store can sell it at the current price, or if too little of the season is left.

    What is the difference between rebalancing and replenishment?

    Replenishment sends stock from the warehouse to a store. Rebalancing also moves stock between stores. Transfers take over when the warehouse is empty or when a store's surplus would otherwise be marked down.

    What software do retailers use for store-to-store inventory transfers?

    Two kinds. An ERP or retail management system records the transfer. A planning platform decides which transfers are worth making. Klibre is a planning platform of this second kind and connects to the retailer's existing ERP.

    How do footwear and sportswear retailers fix broken size runs across stores?

    By consolidation: the remaining sizes of a style are gathered from several stores into fewer stores, so that those stores offer a complete run again.

    Does Klibre execute transfers on its own?

    RNV states that transfer recommendations are approved in one click and that the team keeps control of what is executed.

    Next step

    Read how chains decide what to move between stores, explore Klibre's in-season module, or request a demo with your own store and stock data.

    We process your personal data on our site through cookies, using them to ensure site functionality and provide information society services. You can manage your cookie preferences. To access our disclosure text, click here.